Showing posts with label Oak Tree Stamps. Show all posts
Showing posts with label Oak Tree Stamps. Show all posts

Monday, December 21, 2015

Copic Colored Boy with Ornament Christmas Card


Made for the Oak Tree Stamps Design Team

This is my last card for the Oak Tree Stamps design team. I'm a bit sad to say goodbye but I'm excited to be moving on to my new new design team at Imagine Crafts featuring Tsukineko. I found this cute tree background paper in my stash and decided to color the boy in the same colors.

Making the Card

1. Cut dark brown cardstock 5 1/2 x 8 1/2 inches; fold in half for a 4 1/4 x 5 1/2 inch card base. Cut red cardstock with the 5 inch stitched rectangle die (long side dimensions used). Cut the tree patterned paper with the 4 1/2 inch stitched rectangle die. Adhere as shown.

2. Stamp sentiment and boy on alcohol friendly cardstock with alcohol friendly black ink. Optional: draw line for ground on each side of boy's feet. Color boy with alcohol markers.


3. Die cut boy using 3 1/4 inch stitched rectangle die. Cut red cardstock 1/8 inch larger in each dimension (1/16 inch will show around). Adhere together. Die cut sentiment with 2 1/2 inch stitched rectangle. Cut red cardstock 1/8 inch larger. Adhere together. Adhere these to card as shown.

4. Tie bow with red ribbon. Adhere buttons and bow where shown.


Supplies
  • Cardstock: Dark Brown, Red
  • Patterned Paper: Festivus 6x6 Pad by Michaels Recollections
  • Oak Tree Stamps: All I Want for Christmas
  • Alcohol Friendly Black Ink (e.g. Memento Tuxedo Black)
  • Alcohol Markers (e.g. Copic)
  • Alcohol Friendly Cardstock (e.g. X-Press It Blending Card)
  • Black Pen (e.g. Copic Multiliner)
  • Lawn Fawn: Large Stitched Rectangles Stackables, Small Stitched Rectangle Stackables
  • Embellishments: Red Ribbon, Tiny Buttons
Copic Colors Used:
Skin: E0000, E000, E00 Shading E11, E13
Cheeks: E01, E93
Eyes/Background: B41, B45
Hair: E53, E55, E57, E59
Ornament: R22, R27, R29 Top C03, C06
Ornament Top/Ground: N02, N04, N06
Pajamas: YG06, YG07, YG09

Follow my blog with Bloglovin so you won't miss any of the holiday fun!

Monday, December 7, 2015

Oak Tree Stamps Bear Holiday Card

Made for the Oak Tree Stamps Design Team

I combined two of the stamp sets from Oak Tree Stamps to create this little scene that's perfect for the holidays. The simple outlines of the bear and tree make them easy to fussy cut around to obtain this patterned layer effect.

Making the Card

1.  Cut green cardstock 5 1/2 x 8 1/2 inches. Fold in half to create a 4 1/4 x 5 1/2 inch base. Cut black cardstock 3 7/8 x 5 1/8 inches. Adhere to green base as shown.

2. With black ink, stamp tree (Bear Hugs) on tree patterned paper (Magical Collection by Studio Calico); fussy cut around tree. Stamp bear on brown patterned paper (I found this sheet in my stash but don't know where it came from - one of my 6x6 pads... use any medium brown lightly patterned paper for this). Fussy cut around bear. Stamp stump of tree on same brown patterned paper; fussy cut. Stamp bear on light brown patterned paper (Far and Away FA1010). Fussy cut muzzle, tummy, feet, and inside ears.


3.  Go around each cut piece with a black marker to cover white edges. Adhere parts of bear where they belong; glue stump on tree. Optional: add some pink chalk to bear's cheeks, ears, and pads of feet.

4. Cut blue snow patterned paper (Magical Collection by Studio Calico) 3 3/4 x 5 inches. Randomly stamp snowflakes (All I Want for Christmas) in embossing ink. Emboss with Silver Pearl embossing powder.

5. Cut white cardstock with snow edge (Outdoor Edges). Line up on blue snowflake paper as shown and trim from back. Stamp Merry Christmas sentiment (All I Want for Christmas) where shown.

6. Adhere to card front. Adhere tree where shown. Use dimensional tape to adhere bear. Tie bow with white ribbon. Adhere bow and button as shown.


Supplies
  • Cardstock: Green, Black, White
  • Ink: Black (Versafine Onyx Black)
  • Oak Tree Stamp Sets: Bear Hugs, All I Want for Christmas
  • Patterned Paper 6x6 Pads: Magical Collection (Studio Calico) 331570, Far and Away FA1010
  • Black Marker (e.g. Memento Marker Tuxedo Black)
  • Optional: Pink Chalk
  • Embossing Ink (e.g. VersaMark)
  • Embossing Powder: Silver Pearl (Ranger)
  • Elizabeth Craft Designs 914 Outdoor Edges
  • Dimensional Tape
  • Embellishments: Button with Snowflake, White Ribbon
Follow my blog with Bloglovin so you won't miss any of the holiday fun!

Monday, November 16, 2015

Christmas Card Featuring Anime Girl in Santa Hat

Made for the Oak Tree Stamps Design Team

Here is another design using the Oak Tree Stamps: All I Want for Christmas set. I used this cute little anime girl on a previous card, which I had watercolored. This time I'm using alcohol markers. I kept the colors pretty simple so she would really pop on the card.

Making the Card

1. Cut dark brown cardstock 4 1/4 x 11 inches. Fold in half for a card base. Cut red cardstock 4 x 5 1/4 inches. Cut star patterned paper 3 7/8 x 5 1/8 inches; adhere to red cardstock. Adhere these to front of card.

2. Die cut red cardstock with largest Spellbinders Lacey Ovals die. Die Cut gift background patterned paper with largest Spellbinders Classical Ovals Large.


3. On alcohol marker friendly paper, stamp girl on gift, "All I want for Christmas is You" sentiment, and holly & berries. Optional: add some crosshatching with a black Multiliner in heavily shaded areas. Color with alcohol markers (see list of Copic colors I used below Supplies). Add Wink of Stella Clear to hair ties, neck tie, gift bow, and berries. Cut out images with detail scissors. Use black marker (e.g. Copic Multiliner) to go around the outside to cover white edges. Add glossy accents to hair ties and berries; set aside to dry.

4. Cut out sentiment, mount on red cardstock. Adhere as shown using dimensional tape. Adhere girl on gift where shown using dimensional tape. Glue button, snowflakes, and holly & berries where shown.


Supplies
  • Cardstock: Dark Brown, Red
  • Stamps: Oak Tree Stamps - All I Want for Christmas
  • Patterned Paper: Studio Calico - Magical Collection 6x6 (331570)
  • Spellbinder Dies: S4-314 Lacey Ovals, S4-110 Classical Ovals Large (Use Largest of Both)
  • Alcohol Marker Friendly Paper (Copic X-Press It Blending Card)
  • Alcohol Markers (Copics)
  • Glossy Accents
  • Wink of Stella - Clear
  • Embellishments: Snowflake Button, Snowflakes
  • Dimensional Tape
Copic Markers Used
  • Copic Multiliner to fill in eyes, do some crosshatching, and edge once cut out
  • Skin E0000, E000, E00, E13, E11
  • Cheeks E93, E01
  • Eyes/Gift/Holly Leaves G29, G28, G24
  • Hair Y26, Y28, YR23, YR30, YR31
  • Boots/Skirt T9, T7, T5
  • Shirt/Fir T3, T2, T0
  • Dots/Hat/Tie/Hair Ties/Berries R89, R46, R81

Follow my blog with Bloglovin so you won't miss any of the holiday fun!

Monday, November 2, 2015

Girl on Gift Watercolored Christmas Card

Made for the Oak Tree Stamps Design Team

This little girl was a lot of fun to watercolor! She is so joyful - the perfect choice for a Merry Christmas card. The packages at the bottom went well with the card, but if you don't have this paper, you could stamp them or even doodle them. Note: the watercolor paper is warm toned (yellowish), not white so be sure to use it for the sentiment as well.

Making the Card

1. Cut blue cardstock 7 x 10 inches. Fold in half to for a card base.  Cut red cardstock 3 3/4 x 4 3/4 inches. Cut red/white striped patterned paper 3 5/8 x 4 5/8 inches; adhere to red cardstock then to card base as shown.

2. On watercolor paper, stamp girl on present (Oak Tree Stamps: All I Want for Christmas set) using waterproof black ink. Optional: with a waterproof black pen, draw a line for the ground. Stamp Merry Christmas sentiment leaving enough space to die cut image and cut around sentiment. Watercolor image starting with lightest values, letting dry in between layers. This gives it a painterly look.

3. Die cut watercolored image using Lawn Fawn: Small Stitched Rectangle Stackables. Adhere to card base where shown.

4. Cut strip of presents from patterned paper; adhere near bottom of card. Trim excess from back of card.



5. Die cut packages using Sizzix/Tim Holtz Mini Retro Packages - large in pink and red, small in blue and pink. Cut bows from large red and small pink packages then paper piece on pink and blue packages respectively as shown. Glue a piece of cardstock on the back of each package where the ribbon cross will go: use color matching ribbon to go in the hole - cut just smaller than the package body (hint: I trace the outside of the package on the cardstock then cut just inside the line). Glue ribbons in as shown. Adhere packages where shown using dimensional tape.

6. Cut Merry Christmas sentiment out in a strip, leaving room for flag tails. Cut flag tails and trim as necessary. Adhere to red cardstock. Cut around leaving small margin of red (I trimmed the left side flush). Adhere to card where shown, using dimensional tape.

7. Adhere enamel dots as shown.


Supplies
  • Cardstock: Blue, Red, Pink
  • Watercolor Paper (e.g. Arches Hot Press)
  • Waterproof Black Ink (e.g. Versafine Onyx Black)
  • Watercolor Paints (e.g. Winsor & Newton)
  • Patterned Paper: Jolly Holiday (Recollections) 6x6 Pad
  • Oak Tree Stamps: All I Want for Christmas
  • Lawn Fawn: Small Stitched Rectangle Stackables (2nd Largest)
  • Sizzix/Tim Holtz Mini Retro Packages
  • Enamel Dots
Follow my blog with Bloglovin so you won't miss any of the holiday fun!

Monday, October 19, 2015

Boy with Ornament Watercolored Christmas Card

Made for the Oak Tree Stamps Design Team

Introducing "All I Want for Christmas" from Oak Tree Stamps! This adorable little boy is helping to decorate, in all his wide-eyed wonder. I wanted the main focus to be on him so I decided to subtly add trees to the background rather than to the card.

Making the Card

1. Cut red cardstock 5 1/2 x 8 1/2 inches. Fold in half for a card base. Cut black cardstock 4 x 5 1/4 inches. Cut ornament patterned paper 3 7/8 x 5 1/8 inches. Adhere ornament paper to black mat. Adhere to card.

2. Stamp boy and "Joy" sentiment in waterproof black ink on watercolor paper. I used Versafine on Arches hot press watercolor paper (love the smooth surface). Watercolor the boy, starting with the lightest color in each section, letting it dry then adding a darker shade. This gives it a certain "painterly" look.


3. Fussy cut boy. I used a craft knife for the bit between his arms. Go around edges with black marker pen from the back, e.g. Copic Multiliner with brush tip. This hides any white on the edges and gives it a polished look.

4. Cut "Joy" in a rectangle - big enough to include a flag tail. I hand cut the tail by putting a dot where I want the V to meet, then cut up to it from each side. Adhere to black cardstock, aligning edges so as to do as little cutting as possible to mat the flag.

5. Die cut tree patterned paper with Spellbinders Classic Ovals Small. Die cut red cardstock with Spellbinders Lacy Ovals. Adhere tree oval to red lacy oval. Adhere to card where shown.

6. Adhere boy and "Joy" flag to card where shown, using dimensional tape. Adhere enamel dots as shown. Tie a small bow with red ribbon and adhere.


Supplies
  • Cardstock: Red, Black
  • Watercolor Paper (e.g. Arches Hot Press)
  • Patterned Paper: Jolly Holiday (Recollections) 6x6 Pad
  • Oak Tree Stamps: All I Want for Christmas
  • Spellbinders: Lacey Ovals S4-314, Classic Ovals Small S4-112 (Largest of Both)
  • Enamel Dots
  • Red Ribbon
Follow my blog with Bloglovin so you won't miss any of the holiday fun!

Monday, October 5, 2015

Oak Tree Stamps Mummy Halloween Card


This cute little image of a boy dressed up as a mummy is the perfect selection for Prismacolor pencils and a Sansodor/mineral spirits blending technique.

Making the Card

1. Cut kraft cardstock 7x10 inches; fold in half for a card base. Cut black cardstock 3 7/8 x 5 inches and 4 5/8 x 6 1/8 inches. Cut spider web paper (from Boo! pad) to 3 3/4 x 4 7/8 inches. Cut cream/light orange paisley paper (from Rare Oddities pad) 4 1/2 x 6 inches. Adhere the matching sized patterned papers to the black cardstock as shown. Cut a strip of spider paper (from Boo! pad) about an inch wide.

2. Stamp mummy on white cardstock using a water based black ink that will stand up to mineral spirits and some rubbing (StazOn will probably smear). You may have to heat set it before starting.  Stamp the spider hanging off the back wrap as shown. Draw a black line and some little circles for pebbles as ground using Copic Multiliner or other black pen (test that it won't rub off first).

3. Color with Prismacolor pencils (a list of colors I used is below Supplies). Use a clean blending stump each time you switch colors (or sand off the previous color). Die cut using Small Stitched Rectangle (2 3/4 inch wide) as shown.

4. Stamp "All Wrapped Up" on white cardstock. Cut it in a strip then cut tails as shown. Adhere everything on the card as shown... from the back side of the card, cut off extra sider strip sticking out past the card edges. Adhere pumpkin embellishment.


Supplies
  • Cardstock: Kraft, Black, White
  • Pebbles Patterned Paper: Boo! 732984
  • Oak Tree Stamps: Wickedly Cute
  • Black Ink (e.g. Memento)
  • Tortillion or Stumps for Blending
  • Graphic 45 Patterned Paper: Rare Oddities 6x6 450115
  • Lawn Fawn Small Stitched Rectangle Stackables LF 768
  • Jolee's Boutique: White Pumpkin Repeats 50-21242
  • Prismacolor Colored Pencils
  • Ground Line: Copic Multiliner Black .3
Prismacolor Pencils Used
  • Face: 928, 939, PC1080, PC997
  • Wrap: 914, PC1094
  • Eyes: 904, PC103
  • Hair: 961, 962, 963
  • Ground/Shadow: 941, 946, 966, 967, 968
  • Sky: PC1079, 933, PC208
Follow my blog with Bloglovin so you won't miss any of the spooky fun!

Monday, September 21, 2015

Wickedly Cute Witch Halloween Card

Made by Mary Dimercurio Prasad for the Oak Tree Stamps Design Team

I'm so happy to be using these new stamps from the Wickedly Cute set! I love Halloween - and this set is perfect for a card or to be used as a decoration.

Making the Card

1. Stamp witch and "Stop by for a spell" sentiment from Wickedly Cute Stamp Set on alcohol marker friendly paper with alcohol marker friendly ink.

2. Color image with alcohol markers (the colors I used are listed below Supplies). Optional: add clear Wink of Stella to dress and hat for a shimmery look. Cut around image leaving small white line.

3. Cut magenta cardstock using main card die from Sizzix Framelits Card, Regal Stand-Ups. Cut star background patterned paper (Pebbles - Boo! 732984) using decorator pieces. Adhere to front of card.

4. From bright green cardstock, cut 4 copies of "toil," "&," "trouble" words from Sizzix Thinlits - Halloween Words: Script. Leave the last copy in the cardstock; put removable tape or Post-it tape behind it (if it fell out, just replace it). Using a blending tool, add Mowed Lawn Distress Ink starting at the bottom, blending upwards to the middle. Glue the layers of each word together to form a thick stack with the blended one on top.


5. Adhere witch using dimensional tape where shown. Tie a double bow with black/bright green twine. Adhere words, enamel dots and bow as shown. Cut brad prongs off purple rhinestone brad with wire cutter. Glue to front of card (I used glue dots).

6. Cut striped paper about 1 1/2 x 5 1/2 inches (5 1/2" is the width of the card). Put adhesive on back then wrap twine around 3 times. Adhere to base of card where shown (I used glue on the top and bottom edges to help hold it down since the twine tends to pop up the edges). With wire cutters, clip button loop off back of black cat button. Optional: the cat looked too gray so I colored it with black acrylic paint then painted in eyes with white acrylic mixed with Twisted Citron Distress Ink. Adhere where shown.

7. Cut "Stop by for a spell" into a strip; add tail (i.e. cut a V into the left side). Add Twisted Citron Distress Ink around edges with ink blending tool. Adhere with dimensional tape as shown.


Supplies
Copic Markers Used
  • Skin: E0000, E000, E00 Shading E11, E13 Cheeks E93, E01
  • Hat/Dress/Stockings: V04, V09
  • Eyes/Stockings: YG23, YG25, YG17, YG67
  • Tongue: RV23, RV25, RV29
  • Broom: E55, E57, E59, E49, YR23, YR24, YR27, YR31
  • Hair/Shoes/Mouth: N3, N5, N7, N9
  • Pupils: Copic Multiliner Black
  • Optional: White Acrylic Paint
Follow my blog with Bloglovin

Monday, September 7, 2015

Moody Ballerina Dancing Step-Ups Card

Created for the Oak Tree Stamps Design Team

Here's another card using the adorable Moody Ballerina stamp set by Oak Tree Stamps. This adorable image was watercolored in pink then given an added shimmer to her tutu thanks to a clear Wink of Stella brush pen. Right now Oak Tree Stamps is having a special - 5 stamp sets for $35 plus free shipping!

Making the Card

1. Using the main Sizzix Step-Ups card die, cut the card base from pink cardstock and fold as instructed. Cut striped patterned paper using the large decorator die for the center of the card. Cut the purple patterned paper with the side (starred) decorator pieces. Adhere decorator pieces where shown.

2. Stamp "Dance" and "Like no One's Watching" from Oak Tree Stamps: Moody Ballerina set on polkadot patterned paper as shown. Cut out. Measure and cut a strip of pink paper 1/8 inch larger in each dimension to frame the sentiment. Adhere together as shown.


3. Stamp three dancing ballerinas from Oak Tree Stamps: Moody Ballerina in waterproof black ink on watercolor paper. Watercolor images. Add clear Wink of Stella to each tutu. Carefully cut around each with detail scissors. I used a craft knife to cut out the smallest areas. From the back side, go around edges with a black marker (I used a black Copic Multiliner with brush nib tip). This hide the white edges and gives them a finished look.

4. Cut pink cardstock using Spellbinders Lacy Ovals (check size against ballerina). Cut oval from polkadot patterned paper; adhere to lacy oval. Adhere this to main card as shown. Adhere sentiment where shown using dimensional tape. Adhere ballerinas where shown using dimensional tape.

5. Die cut one frame edge from purple cardstock; add clear Wink of Stella. Adhere to bottom of card where shown. Cut two lengths of pink/white twine. Tie in a single bow. Adhere button and twine as shown.


Supplies
Follow my blog with Bloglovin

Monday, August 17, 2015

Bear Hugs Birthday Flip-its Card

Created for the Oak Tree Stamps Design Team

This is the second card I made using Oak Tree Stamps' Bear Hugs set! If you missed the first one, you can find it here; I had altered the stamp to look like a panda bear. This time I left the bear mostly as is, coloring it with neutral tones in contrast to all the colors in the birthday card.

Making the Card

Hint: when making cards, I suggest beginning by first choosing your patterned paper. This way you can match the card base and other elements to the colors in the pattern.

1. From blue cardstock, die cut a card base using the main die from the Square Flip-its #2 set.


2. Die cut the decorator pieces from patterned paper. Adhere where shown. Cut a square 2 1/4 x 2 1/4 inches. Stamp "You're the Beary Best!" in the center. Add doodling around the edges. Adhere to back side of flip panel. Optional: cut another larger decorator piece from white cardstock to stick to the back of the card as writing space. (Note: there is another photo of the back of the flip-it further on.)

3. Stamp bear in appropriate black ink on alcohol marker friendly paper. Color with alcohol markers. Find the list of Copic markers I used below Supplies. Hint, in the darker furry areas, color the bear first with the lightest color then start adding "hair" in progressively darker colors - add more of the darker hair in the shadows, leaving the highlight areas lighter. Add highlights to the bear's eyes and nose with a white gel pen. Rough cut around bear - leaving about half an inch of space. Adhere to a piece of black cardstock. The black behind the bear will show from the flip side of the card.

4. Cut around the outline of the bear plus around the arm that will hold the balloon string. From the back side of the bear, go around the edges with a dark gray marker (I used N7) to get rid of the white edge line. This gives it a more polished look.

5. Die cut balloons from red, green, and yellow cardstock using Balloons Triplits Die Set (I chose my red balloon to be larger than the yellow and green). With black pen, doodle around the edges of the balloons as desired. Die cut three strings from black cardstock.

6. To create the banner, cut a strip of white cardstock about 3/8 inch wide and maybe 4 inches long (you will cut it to size later). Lightly make pencil marks 2 1/8 inches apart where the greeting will go, sort of in the center of the banner to give you some wiggle room. Pencil "Happy Birthday!" within those marks. I tried to mimic the Bear Hugs font. Alternatively you could use a stamp. Ink over in black. Hold the banner in position on the card and mark the left edge. Cut banner to about 2 3/4 inches (the right tail will stick out). Cut a V from the right side. Hint: I make a small dot in the center where the V will meet then cut from each side. Doodle around the edges of the white banner with black pen. Cut red cardstock 1/2 inch wide and a bit longer than the trimmed down white banner (about 3 inches). Adhere white banner down center, lining up the left side flush. Trim a V on the right side to match the spacing around the banner. Adhere the banner as shown.


7. Temporarily place bear, green balloon, and string in place. Carefully adhere string end under balloon, plus under the loop, then balloon (not getting glue on back where it sticks up over card). Add dimensional tape under bear (again noting where bear sticks up over card and avoiding that area). Put string under bear's paw and stick him to the card.

8. Glue both balloon strings and yellow balloon as shown. Use dimensional tape to adhere red balloon. Tie a bow with the green ribbon. Adhere enamel dots and bow as shown.


Supplies
Copic Markers Used
Fur: E37, E35, E34, E33, E32, E30
Foot Pads: E97, E95, E02, E01
Edging: N7

Monday, August 3, 2015

Oak Tree Stamps - Bear Hugs Step-ups Card

Created for the Oak Tree Stamps Design Team

This is my first post as part of the Oak Tree Stamps Design Team. Yay! Their stamps are so cute! They don't have many sets right now but there are some wonderful designs planned, so be sure to check back with them often! Also, I have a discount code good for 30% off this stamp set just for reading my blog! Use code MDP30. Alternatively, get the entire bundle of 5 sets for $32.50 off (!) using code OAKTREEFANS (only one code may be used).

Making the Card

1. Die cut base card Sizzix Card, Basic Step-Ups from light gray cardstock. Die cut front panel and step decorator pieces from Something Wonderful 6x6 Paper Pad, small heart pattern. Adhere to card base where shown. Using a black pen, doodle around each. Fold as instructed. You could fold first but you may want to flatten before doodling; I kept track of where I wanted the tree and bear to go.

2. From Oak Tree Stamps: Bear Hugs, stamp tree on Save the Date 6x6 Paper Pad floral pattern paper; stamp bear on Coconut Bazzill paper. Color bear as shown with alcohol markers (see list of Copics I used below Supplies). I modified the nose very slightly to look more like a Panda's nose (I suggest practicing on bears stamped on scrap paper first to get the look you want). I also colored outside the ears to make them more furry and added dark neutral grays around the eyes - a few shades down from black so you can still see the eyes. The gel pen really makes them pop - add small lines at the base of the eyes and dots for specular highlights. Add a little shine on his nose as well. Fussy cut around tree and bear leaving a margin. Adhere to card using dimensional tape.

Original stamp (left), middle and right are (ugly) practice bears on scratch paper.
3. Die cut small heart from Coconut Bazzill paper; color to match Panda's feet. Adhere where shown. Stamp "Bear Hugs" sentiment on Coconut Bazzill paper; die cut with banner die. Using black pen, doodle around edge of banner, drawing in 3D curves as shown. Use cross-hatching for subtle shading.


4. Adhere buttons as shown using Glue Dots or other very strong adhesive; overlap and add dimensional tape under part of top (black) button as necessary (I used a double layer under the overhanging part). Tie twine in a small bow and adhere as shown. Adhere banner with dimensional tape.

Flattened card fits perfectly in an A2 envelope!
Supplies

  • Cardstock: Light Gray
  • Patterned Cardstock Paper: Something Wonderful, Save the Date, Both 6x6 Pads by Teresa Collins
  • Oak Tree Stamps: Bear Hugs
  • Alcohol Marker Friendly Ink: Black (Memento Tuxedo Black)
  • Alcohol Marker Friendly Paper (Bazzill Basics Coconut 10-1044)
  • Alcohol Markers (Copics)
  • White Gel Pen
  • Black Pen (Copic Multiliner .5)
  • Sizzix Card, Basic Step-Ups 660023
  • Banner Die: Lawn Fawn - Lawn Cuts Bannerific LF483
  • Heart Die
  • Buttons
  • Twine: Black and White
  • Dimensional Tape, Adhesive, Glue Dots

Copic Markers Used
100 Black, N10, N8, N6, N5, N3, N2, N1, N0
RV32, RV11, RV10