Wednesday, October 9, 2024

Making Stamp Ephemera Using Tim Hotz Stamps

Tim Holtz Stampers Anonymous Stamp Collector VersaFine Clair

I had so much fun making these vintage looking postage stamps! I looked up vintage stamps online to get an idea of colors but there was a huge range, so pretty much any ink color will do. I chose mostly muted colors with a few exceptions. The Tim Holtz/Sizzix Postale die set comes with three dies to make postage edges. These matched most, but not all, of the Tim Holtz/Stampers Anonymous Stamp Collector set. I fussy cut around the others with a good pair of detail scissors.

These stamps are perfect for junk journals, cards, and even decorating envelopes. Please do not use them as postage, but they are perfect for hand delivering; you can even "cancel" them yourself if you have one of the many postage themed stamp sets out there (for example, Tim Holtz/Stampers Anonymous Correspondence - see the Supplies section below for more recommendations).

Copyright Notice: ©Mary Dimercurio Prasad. All rights reserved. Any illegal reproduction of this content, including images, will result in immediate legal action.

Disclaimer:  Please help support my work in this small way - just use my links if you plan to purchase anything - there's no extra cost to you. Here's the official jargon: links, affiliate links, and cookies may be used in this post and on this site. Using this site implies your consent. I participate in the Amazon Services LLC Associates Program, Share a Sale, and other affiliate programs; these affiliate advertising programs provide a means for me to earn fees by linking to amazon.com and/or other affiliated sites. This helps offset a small portion of my crafting addiction... uh, hobby. I am truly thankful for your kind support! I also receive free products from companies, possibly monetary compensation, and sometimes free products for review. Regardless, all opinions are my own. Google and Blogger use cookies to provide and improve their services. See Notice at the bottom of this blog for a longer description and/or see the full Privacy Policy
 for even more details.

Tim Holtz Stampers Anonymous Stamp Collector Sizzix Postale

Making the Stamps

1. Antique several sheets of high quality/premium printer paper (e.g. Hammermill Premium). I do not use cardstock for this; paper makes them feel and look more like real stamps. I antique the paper by pressing various colors of Distress Inks on a craft mat or Glass Media Mat, spraying lots of water, then dragging the paper through it. Start with a light color such as Antique Linen to cover the entire sheet. Dry with a heat tool or let air dry before continuing. If you want darker paper, use less water or use something like Vintage Photo but start with more water unless you want very dark results. To add texture, press various light brown inks (maybe 2 or 3 colors) onto craft mat again, spray with water, break up ink by running your fingers through it, then tap paper in it, moving it to different areas. I recommend starting with light colors and more water first. Dry between layers with a heat tool. Tim Holtz shows how to do this in many of his videos when creating backgrounds. Make a lot of sheets if you want many colors.

2. For optimum efficiency, I recommend mounting the entire unweeded stamp onto a stamp platform (e.g. Tim Holtz or Misti). If you have already separated the stamps, you'll need to move each stamp onto the stamp platform - be sure to leave enough room between each to cut apart and die cut later. Ink up and stamp onto antiqued paper. I recommend using VersaFine Clair inks. They have the crispest results. Note: you should use a heat tool to set the ink as it tends to dry slowly. I also used Ranger Archival Ink and Tim Holtz Distress Archival Ink to fill in colors I didn't have in VF Clair. Clean stamps with Stamp Shammy and water.

3. Cut stamp images apart, leaving room for die cutting. Fussy cut around any that don't fit in one of the dies with a good pair of detail scissors. Using a die cutting machine and Postale Dies, die cut the rest of the stamps. I like to do this in front of the TV or while listening to a podcast.

4. Optional; Use an ink blending tool and dome foam to ink edges of stamps with a brown Distress Ink.

Supplies

Tuesday, July 30, 2024

Use Scrap Strips to Make Ephemera Using Stamps and Washi

Tim Holtz Design Tape Ephemera Strip Washi

I have a hard time throwing away scraps, including strips. I even keep strips that I cut off the ends of patterned paper - you know, the white strip at the top, sometimes with a hole? Some come with a pattern that's found on the reverse side - I even keep those!

I'm working with cream and white scraps here but you could do this with light colored scraps too. If the color is too dark, the stamping or washi tape may not show up well. Use these strips to decorate cards, junk journals, scrapbooks, envelopes (I'd recommend using thinner cardstock or paper scraps for envelopes), decor, and more.

Copyright Notice: ©Mary Dimercurio Prasad. All rights reserved. Any illegal reproduction of this content, including images, will result in immediate legal action.

Disclaimer:  Please help support my work in this small way - just use my links if you plan to purchase anything - there's no extra cost to you. Here's the official jargon: links, affiliate links, and cookies may be used in this post and on this site. Using this site implies your consent. I participate in the Amazon Services LLC Associates Program, Share a Sale, and other affiliate programs; these affiliate advertising programs provide a means for me to earn fees by linking to amazon.com and/or other affiliated sites. This helps offset a small portion of my crafting addiction... uh, hobby. I am truly thankful for your kind support! I also receive free products from companies, possibly monetary compensation, and sometimes free products for review. Regardless, all opinions are my own. Google and Blogger use cookies to provide and improve their services. See Notice at the bottom of this blog for a longer description and/or see the full Privacy Policy
 for even more details.

Tim Holtz Distress Oxide Ink Ephemera Strips Stampers Anonymous

Making the Strips

1. Gather up your cream or white cardstock scrap strips and/or cut some strips from larger scraps or full sheets. You may also use light colored cardstock strip scraps.

2. See photo for examples. Use thin washi tapes to line edges of thicker strips. Use thicker washi tapes either by themselves or with stamps depending on the thickness of the strip and the desired look. See Supplies, below, for some of the Tim Holtz Design Tapes I used.

3. Optional: use a blending tool with sanding disk on a small cutting mat to sand off some of the surface of the washi tape. Use a soft cloth, such as a microfiber cloth, to wipe off and pick up any dust before handling. Sanding makes the tape look less shiny, makes it adhere better, and gives it an aged look. Note: I use the back side of my cutting mat so I won't sand off the lines on the front. You may want to use a dedicated mat for sanding.

4. Stamp between washi tape or stamp above/below as desired. I used VersaFine Clair Inks for their crispness. Look for small stamps to fit the space. If a stamp has two lines and you want to stamp in one line, you may either ink one half at a time or mask off one line at a time (e.g. use a Post-it to cover half while inking then remove before stamping). If you get ink in an undesired area, I recommend using a Stamp Shammy to clean off ink; I fold and use a small edge or corner for accuracy. Stamp Shammies are also excellent for cleaning your stamps before putting them away.

5. Use blending tool with a domed foam applicator and brown Distress Oxide Ink or brown Distress Ink to ink edges of each strip. I used Vintage Photo Distress Oxide Ink. You may want to do this on a Craft Mat or Glass Media Mat.

Tim Holtz VersaFine Clair Grunge Junk Journal

Hints: See the photo above; each square is 1/2". If your stamping was crooked, try stamping over with a darker ink, maybe using a seal type stamp. You may also trim down the area and separate areas by stamp. For example, I stamped "Handle With Care" twice but they were crooked so I cut around them and inked the edges to use separately. I stamped the red stripes (above the blue and red arrows) but left too much of a gap between the stamps so I added a black Air Mail seal over that area to hide the gaps. If you have very small scraps, fit very small stamps or washi (the red "Air Mail" with stripes is one stamp).

For a more distressed look, bend strip in different directions, each time sanding and/or inking the bent edge before flattening back out - see top strip with "Special Delivery" stamped down the middle and black washi tape at top. The music strip is just washi alone - the strip was very thin, I even had to trim it down to fit the paper.

Supplies
Follow my blog with Bloglovin so you won't miss any of the ephemera strip fun!

Sunday, July 28, 2024

Use Scraps to Make Vintage Labels - Tip to Prevent Ink Beading

Tim Holtz Sizzix Vintage Labels 665929

Use your cream and white scraps to create lots of labels in different colors. Grunge them up for a more vintage look. Add adhesive to the back using a Xyron Creative Station, Xyron Creative Station Lite, Xyron 250 Create-A-Sticker, or Xyron 150 Create-A-Sticker if you would like to make them into stickers. I listed these in order of price (high to low), which also corresponds to size. The largest Creative Station will accept paper/cardstock up to 9 inches wide (e.g. US letter) and may also be used with 5 inch cartridges. The Creative Station Lite will accept 5" and 3" cartridges. The 250 has a 2.5" opening, and the smallest 150 has a 1.5" opening. All are refillable, but the larger machines (former two) offer more and varied cartridges, such as lamination and magnet, whereas the latter two are just for making stickers. Note: the largest Vintage Labels will not fit in the smallest sticker maker.

Labels can be used in many ways. You can stamp on them with words or numbers for a more traditional look, or stamp them with images for something different. Use rub-ons or vellum stickers on them. Use them on cards, in scrapbooks, or junk journals. Write on them to label folders, storage bins, etc. Make tabs out of them by either folding one in half or putting two of the same size/type back to back on a page or other edge so that part sticks out.

Copyright Notice: ©Mary Dimercurio Prasad. All rights reserved. Any illegal reproduction of this content, including images, will result in immediate legal action.

Disclaimer:  Please help support my work in this small way - just use my links if you plan to purchase anything - there's no extra cost to you. Here's the official jargon: links, affiliate links, and cookies may be used in this post and on this site. Using this site implies your consent. I participate in the Amazon Services LLC Associates Program, Share a Sale, and other affiliate programs; these affiliate advertising programs provide a means for me to earn fees by linking to amazon.com and/or other affiliated sites. This helps offset a small portion of my crafting addiction... uh, hobby. I am truly thankful for your kind support! I also receive free products from companies, possibly monetary compensation, and sometimes free products for review. Regardless, all opinions are my own. Google and Blogger use cookies to provide and improve their services. See Notice at the bottom of this blog for a longer description and/or see the full Privacy Policy
 for even more details.

Sizzix Tim Holtz Vintage Labels Ranger Archival Ink

Making the Labels

1. Gather your white card stock and cream card stock scraps. Of course you may also use full sheets but this is a great way to use up your scraps! If pieces (or sheets) are too big for your die cutting plates, you may want to cut them down to fit first. This is especially important if using a Sidekick. Note: I show how to use scrap strips in a different post.

2. Before inking your Vintage Label dies, you need to condition them or the ink will bead up, giving you poor results. See photo below. The labels on the left were inked and die cut before conditioning the dies. The labels on the right were done after (same ink, same dies). To condition the dies, use toothpaste on a cotton swab to scrub well over the raised surface of each die where ink will go. I did this back and forth around each die about a dozen or more times. A little surface metal will come off - you should see this as you rub the toothpaste. This is how it conditions the surface; it roughs up the surface on a micro level, giving the ink a place to sit without beading up. This should only have to be done once, although if not enough of the surface is roughed up, this process may need to be repeated.

Sizzix Tim Holtz Vintage Labels Ranger Archival Ink Conditioning

3. Have die cutting plates ready. One plate will be the cutting side; set this aside for the moment. Place the non-cutting side nearby so you can easily transfer inked dies to this plate when ready. Choose Vintage Label dies (or die) to fit a scrap piece of white or cream cardstock. Place these dies cutting side up on a sheet of scrap paper - I use scrap copy/cartridge/printer paper. Tap Ranger Archival Ink (or Distress Archival Ink) over surface until the flat raised areas are well covered. If the ink is still beading up too much, you may have to repeat conditioning. Be sure your ink pad is not too dry or you may not get enough ink to transfer on to the die. Once inked, carefully lift paper and slide dies onto plate, still cutting side up. You may need to slide them around in a configuration that will work with your piece of cardstock. Place cardstock carefully over dies then place cutting plate on top. Be sure nothing shifts. You may have to hold the plates in both hands as you start to feed them into your die cutting machine. If you find they move too much, you could try using washi or painters tape to temporarily tape paper to the bottom plate before placing the cutting plate on top.

Note: If you want to change ink colors, I recommend using isopropyl alcohol to clean dies. I don't recommend using stamp cleaner as any oil residue left behind may prevent ink from sticking.

4. Optional: after die cutting, ink edges of labels with Distress Ink or Distress Oxide Ink. I used Vintage Photo Distress Oxide Ink on an ink blender tool with domed foam. Note that if you do not ink the edges, some of the color of the Archival Ink that got on the blade may show a little. Adding inking around the edges helps hide this.

5. Optional: if you want to create sticker labels, put labels through a Xyron Creative Station or Sticker Maker (see other models listed in supplies, below). If you are doing multiples, you may cut them apart or leave them on the larger sheet until you want to use them. Note: you may add the adhesive to the cardstock before die cutting but I find that this wastes more adhesive and makes one side of the cardstock really slick, possibly making it more difficult when feeding into the die cutting machine.

Tim Holtz Vintage Labels Sizzix Grunge Ephemera

Monday, June 24, 2024

Halloween Lilly Accordion Rectangle Card

Made for the ECD Susan Tierney-Cockburn Design Team

I just love Graphic 45 papers, especially the Halloween pads! It was so much fun using the coordinating 6x6 and 8x8 Rare Oddities papers - the colors and designs, oh my! For the front of my card, I created a lily in purple and black (based on the Landini Lily images I found online) using Susan Tierney-Cockburn's beautiful Lily dies; prefect for my Halloween theme.

Copyright Notice: ©Mary Dimercurio Prasad. All rights reserved. Any illegal reproduction of this content, including images, will result in immediate legal action.

Disclaimer:  Please help support my work in this small way - just use my links if you plan to purchase anything - there's no extra cost to you. Here's the official jargon: links, affiliate links, and cookies may be used in this post and on this site. Using this site implies your consent. I participate in the Amazon Services LLC Associates Program, Share a Sale, and other affiliate programs; these affiliate advertising programs provide a means for me to earn fees by linking to amazon.com and/or other affiliated sites. This helps offset a small portion of my crafting addiction... uh, hobby. I am truly thankful for your kind support! I also receive free products from companies, possibly monetary compensation, and sometimes free products for review. Regardless, all opinions are my own. Google and Blogger use cookies to provide and improve their services. See Notice at the bottom of this blog for a longer description and/or see the full Privacy Policy
 for even more details.

Making the Card

Note: basic color and word sheets come from 6x6 Graphic 45 - Rare Oddities pad, other decorative papers (books, butterflies, etc.) from the 8x8 pad.

1. From black cardstock, die cut three copies of the main Accordion Rectangle as the card base. Also cut green newspaper print/cream background paper using main Accordion Rectangle. Adhere it to one of the black card bases then cut the connecting tabs and flap off (see instructions in packaging); this will be the last panel of the card. For the first panel, which will be the front of the card, using the decorator die (largest rectangle die), cut the purple with cream words paper from 6x6. Adhere to center (flap to right).

2. Cut leaves and stem of Garden Notes - Lily from green page. Using applicator, shade with green Pan Pastel (I folded the leaves backwards down the middle to chalk the center line). Optional: you may use Distress Ink as shown in the video - Peeled Paint should work. Cut petals and stamen from purple page. Using blending tool to add Dusty Concord Distress Ink covering the side with words and as shading to purple side of petals and stamen. Add Black Soot Distress Ink to top and bottom of both sides of each petal as well as stamen. With a watercolor brush, brush some Black Soot in stripes down the middle of each petal (I used the originally purple side of the paper as the fronts for the stripes, which will form the inside of the petals). Shape flower and assemble as instructed in video below. Note: I used black embossing powder as pollen on the ends of the stamen.

3. Using Katie Flourish Frame Edges, cut 4 long edges and 4 short from purple paper, 2 long edges and 2 short from both orange and green. Adhere purple forming frames on both sides of first panel (step 1). Adhere orange to middle (flap right) and green to last (no flap).

4. Tie two pieces of twine together into a bow. Optional: the white was too bright against the cream in the card so I used Antique Linen Distress Stain and water to antique it. Cut cream tag using small tag on the main Tags Pivot Card; trim to a single tag (note: I used a scrap just larger than the last tag). Stamp October word background with Concord Grape Distress Ink 2nd generation stamping, i.e. stamp first on a scrap then on the tag. I used Cherish the Day CTMH stamp set, but it might be difficult to find; you may substitute it with any Halloween related word stamps. Using blending tool, add some of the same ink to edges. Sand to give it a grunge look, concentrating a bit more where the "Happy Halloween" will go. Stamp "Happy Halloween" in black near bottom of tag. Adhere flower and leaves to front panel as shown - I cut the stem and pieced it so it would go in the direction I needed to put the flower in the corner and have the stem behind the tag. Adhere tag using dimensional tape. Adhere bow as shown.


5. Cut raven, cat, tree, and bats from black cardstock. Add eyes to cat with yellow or green Milky pen (or paint with acrylic). Use cream Pan Pastels to add highlights to backs of raven and cat. Also add some to the tree. Add a dot of black Enamel Accents for raven's eye. Cut pumpkins from orange paper (I also cut stem area from green, trimmed excess, then glued on pumpkins). Use paintbrush to add lines with Rusty Hinge Distress Ink. Trace pumpkins on yellow cardstock. Cut just inside the lines; glue behind pumpkins to make eyes "glow."

6. Cut pieces of 8x8 patterned papers shown on middle card - books, butterfly strip, "Bewitched" strip, and bottle label. To make the pieces fit perfectly, use the main Accordion Rectangle die to cut them: first rough cut each piece larger than where it will be placed, then looking through die, tape with Post-It or other removable tape before cutting. Adhere where shown (I glued in this order, books, bottle label - not overlapped, butterfly strip, "Bewitched" strip. Mask butterfly strip and above then stamp spider in black where shown (I found the spider stamp in the dollar bin at my local craft store - if you can't find one on a web strand, just stamp a small spider and draw a line down using a black pen). Adhere cat and raven as shown.

7. For the last panel, temporarily place tree and trim branches as desired - if any stick off the left side, cut them off (I did this after gluing). Adhere tree but don't put glue where large pumpkin will be placed; adhere pumpkin slightly under tree. Adhere small pumpkin with dimensional tape. Adhere bats where shown. For a little dimension, I bent a couple bat wings up (you could do a double layer of bats with top set of wings bent up if desired). Adhere enamel dots where shown. Assemble card as per instructions on packaging.


Supplies

Elizabeth Craft Designs
  • 972 Accordion Rectangle (updated to Karen Burniston's new versions)
  • 995 Garden Notes - Lily
  • 989 CountryScapes - Country Critters 1 (Raven, Cat)
  • 1078 CountryScapes - Backyard 3 Apple Orchard (Tree)
  • 1080 CountryScapes - Build a Scarecrow (Pumpkins)
  • 1082 CountryScapes - Critters 4 (Bats)
  • 973 Tags Pivot Card (updated to Karen Burniston's new versions)
  • 977 Katie Flourish Frame Edges
  • 808 Susan's Garden 4pcs. All metal Tool Set in Luxury Case
  • 810 Large Molding Pad
  • Pan Pastels: Susan's Garden PanPastel Flower Coloring Kit 3 - 30117 (Green, Cream)
  • Double Sided Adhesive
Other Supplies
  • Cardstock: Black, Cream, Yellow
  • Graphic 45 Paper: Rare Oddities 6x6 and 8x8 Pads
  • Distress Inks: Dusty Concord, Black Soot, Rusty Hinge
  • Embossing Powder: black
  • Optional: Antique Linen Distress Stain
  • Twine: White/Light Purple/Dark Purple (Tricolor)
  • Happy Halloween Stamp
  • CTMH Stamps: Cherish the Day #S1111 (Stamp of the Month November 2011), Just to Say from Artfully Sent Cricut Collection #D1629
  • Milky: Yellow or Green OR Acrylic Paint
  • Enamel Accents: Black
  • Spider Stamp
  • Dimensional Tape
Follow my blog with Bloglovin so you won't miss any of the fun!