Made for the ECD Susan Tierney Cockburn Design Team
Susan's new leaf dies make really beautiful fall leaves. I wanted to make a wreath of all the different fall colors; Karen Burniston's Ring Accordion was the perfect base for such a card. I also wanted to use Susan's smaller leaves from a previous release to make matching shaker elements for the other side. The card makes a perfect decoration for fall or Thanksgiving.
For the words, I wanted to add foil in red and green. I have used Therm-O-Web's Deco Foil before but I recently bought some Heidi Swapp Minc foil on sale so I thought I would give it a try. Unfortunately this did not work nearly as well as the Deco Foil - at least not with my laminating machine. I even put them through 5 or more times. There were gaps in the coverage. I may try ironing it with a craft iron next time.
Making the Card
1. In order to do foiling (optional), you will need to print the words using a laser printer (toner based printer). I printed these on yellow/gold cardstock. Create a document with the words "Thankful" and "Grateful" using a fancy font, making sure they are far enough apart to die cut around each (I put one on each side of an 8 1/2 x 11 inch sheet). Print and foil as instructed. I made "Grateful" with red foil and "Thankful" with green foil. For more instructions and another card example of foiling, see my Rainbow Foiled Greetings Birthday Card post.
2. Using the Ring Accordion die set, cut two green ring accordion frames. Cut two more, one from yellow/gold cardstock and one from yellow/orange - you will only use the centers of these so cut the tabs off flush to the center circle. Using the circle die, cut the center out of the yellow/orange circle to create a circle frame. Again using the circle die, cut the foiled words from the yellow/gold cardstock. Cut eight border pieces from the yellow/gold cardstock. Train the folds on both green frames.
3. Using Garden Patch -7/8-inch & Mini Leaves, choose the small leaves that look the most "fall-like." I also used the leaf dies from Garden Patch - 1 1/2-inch & Mini Roses (even though they are for flowers, they look enough like fall leaves). Cut a variety of these leaves from Shimmer Sheetz (see Supplies list for colors and links). These will be part of the shaker elements.
4. Using the smaller Woodland Leaves dies, cut several sets from each cardstock color: light green, green, yellow/gold, yellow/orange, and red. Chalk them in fall colors (I used the fall leaf colors from all three Pan Pastel sets; see Supplies for links). Draw vein lines on each leaf with green or red colored pencil. Shape leaves by rubbing with large stylus on backs and drawing a line down the middle with the leaf tool for the main vein. Curl edges of some using edge of a die pick or handle of a small paint brush.
5. To create the shaker, insert "Thankful" circle inside a heavy duty presentation sheet protector (or other pocket material) and put the circle die on top to use as a guide. You may want to adhere a couple of the Shimmer Sheetz leaves over top of the word (I forgot to do this first so ended up using tweezers; I also went too far around, making it difficult to add the shaker elements). Use the Fuse tool to go around outside of the circle die, maybe half way around or so. Add seed beads, Shimmer Sheetz leaves, and chunky glitter as desired (in front of cardstock - anything behind will not show). Finish sealing the pocket. Cut around outside of seal, close but leaving a small space around the seal.
6. Adhere four border pieces around one of the green frames then the yellow/gold circle to the center (tabs to the right - remembering the flat side is the bottom). Cut off the tabs that are sticking out from the frame (one on the center and one on the frame outside). Adhere shaker using double sided adhesive to the center, then the yellow/orange frame. Adhere two leaves as shown.
7. On the other frame, laying flat with the tab to the left (flat part bottom), glue down the last four frame pieces. Flip the frame. Adhere leaves to "Grateful" circle as shown. Stick this to the center of the frame using dimensional tape. Now for the tricky part. You will glue leaves around the frame, noting that the ones at the bottom that over-hang will have to be folded up to allow the card to stand (i.e. don't leave much over-hanging) and leaving the tab area relative clear so it may fold (any leaves that hit the other frame will also need to be folded). Keep in mind the types of leaves and colors while gluing them to the frame so that they make a pleasing pattern (I tried to keep from placing two alike type or color leaves together). It helps if you lay them out first before gluing.
8. Using strong adhesive, stick tabs as directed to assemble the card. Finish by adhering the final leaves to the front of the card. I didn't mind that the leaves on the reverse side showed from the front of the card since it is intended to be used as a display piece.
- 904 - Ring Accordion
- 1092 - Woodland Leaves
- 1004 - Garden Patch -7/8-inch & Mini Leaves
- 1001 - Garden Patch - 1 1/2-inch & Mini Roses
- Shimmer Sheetz: Yellow Iridescent SS 0108, Orange Iridescent SS 0109, Red Metallic SS 0214, Green Metallic SS 0213, Fire Opal Gemstone SS 0218
- Pan Pastels: Susan's Garden PanPastel Flower Coloring Kit 1 - 30115, Susan's Garden PanPastel Flower Coloring Kit 2 - 30116, Susan's Garden PanPastel Flower Coloring Kit 3 - 30117
- 808 - Susan's Garden 4pcs. All metal Tool Set in Luxury Case
- 810 - Large Molding Pad
- Double Sided Adhesive
- 803 - Cuttlebug and Big Shot Metal Adaptor Plate
- Cardstock: Red, Light Green, Green, Yellow/Gold, Yellow/Orange
- Heidi Swapp Minc Foil: Red, Green
- Photo Sleeve Fuse Tool
- Heavy Duty Presentation Sheet Protectors (I buy mine from Costco)
- Colored Pencils: Red, Green (e.g. Prisma Color 925 Crimson Lake, 1090 Kelp Green)
- Chunky Glitter - Red (e.g. Martha Stewart Crafts)
- Seed Beads: Green
- Dimensional Tape